(08) 8332 2666

Timber, Veneer, Duropal and Panel Products

Decoboard
Decoboard - Image 2
Decoboard - Image 3

Decoboard

Decoboard can be used for:

Carcass and front quality for furniture making, shopfitting and interior fitting. Particularly for areas with higher demands on moisture resistance i. e. in bathroom furniture.

  • High-quality melamine resin direct lamination to both sides
  • Comprehensive range of decors

  • Suitable for non load-bearing purposes in damp areas.

Clear

DECOBOARD P3®

Melamine resin bonded particleboard with melamine resin facing on both faces for damp areas.

Overview

High-quality melamine resin direct lamination to both sides

Comprehensive range of decors

Suitable for non load-bearing purposes in damp areas.

Materials Data

Length (mm)Width (mm)Thickness (mm)Surface Textures
2800210018MP - Black
NW - Chestnut
NW - Dark Oak
NY - Jerusalem Pine
MO - Natural Chalet Oak
RU - Oiled Oak
RU - Pale Lancelot Oak

Product standard

  • EN 14322

Fire behavior

  • Normally flammable
  • D-s2,d0 (EN 13501-1, CWFT acc. to 2007/348/EG)

Formaldehyde emission class

  • E1 (EN 120)

Product safety

This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

The surface is physiologically safe, and approved for direct contact with food acc. to Regulation (EU) No. 10/2011.

Special

Textures LI / ME / ML: The decor program is available on request.

Processing

  • Can be worked with carbide tipped tools on conventional woodworking machines.

Edging

  • Thick and thin edges are suitable.
  • EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

  • All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

  • Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
  • Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage, handling and transport

  • On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable.
  • Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
  • Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
  • Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping.
  • Sheets / boards must not be moved against each other; they should be moved individually by hand or with suction equipment.

Health and safety

  • Please wear the appropriate personal protective equipment (PPE) when processing and handling.

Cleaning and care

  • The surface can be cleaned with water and gentle cleaning agents.
  • The use of cleaning products, cloths, sponges with abrasive ingredients, should be avoided.
  • For removal of particularly stubborn stains, industrial cleaners suitable for plastic surfaces can be used. Before use we would recommend testing in a small, hidden area.

Disposal

  • We recommend material recycling or energy recovery.